Product Description
Top selling! remove scar acne co2 fractional laser scar removal machine
CO2 Fractional Laser System
Product Description
Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser-delivery systems, enables high-energy treatments while minimizing risks.
Indications
Skin resurfacing (to improve texture)
Pigmented lesions: Age spots / brown spots / sun spots
Wrinkles around the eyes
Acne scars
Surgical scars
Melasma (mask of pregnancy)
Actinic Keratoses
Specifications
1. Applicable to all skin types
2. CW, Pulse and Ultrapulse operation modes
3. Patient-personalized settings
Applications
1. Skin renewing and resurfacing
2. Wrinkle removal, skin tightening
3. Age spots and acne scar removal
4. Smooth burnt scars and surgical scars
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
Working Mode
Continuos: Power 1~30W step adjustable each 1 W
Pulse: Power 1~30W step adjustable each 1
Interval time: 1~999ms
Ultra pulse: Power 1~30W step adjustable each 1
Modulated frequency of 1000 Hz
Pulse Duration: 90-1000μs
Scanning mode
Scan mode: Ellipse, Rectangular.
Scanning Range: 15*15mm
Repeat Delay: 0.1s---- 5.0s.
Micro Pulse Energy: 5mJ---50mJ.
Treatment Level: 0.30%-----25.0%.
Passes: 1-----10 times.
Estimated Power: 24mJ--1000J.
Ellipes estimated power: 31mJ----1000J
Rectangular estimated power: 24mJ----981J
Treatment area: 0.1*0.1mm, ----- 20*20mm.
Handpiece Velocity: 0.1-----9cm2/s
Scanning Depth: <1.8mm
| Wavelength |
10.6μm |
| Power |
30W |
| Indication beam |
Diode laser (532nm,5mW) |
| Micro Pulse Energy |
5MJ ~ 100 MJ |
| Transmission System |
7-Ariculation Joint
Spring-Balanced Light Guiding Arm
|
| Scanning Mode |
Scanning area: min 0.1 ×0.1mm max 20 ×20mm
Scanninh graphic: Rectangular, Ellipse, Round, Triangle
Handle piece Velocity: 0.1~9cm²/s
Scan depth:<2mm
Estimated power:24mJ~1000J
|
| Continuous |
1~30W,step adjustable per 1W |
| Pulse Interval time |
1~999ms, step adjustable per 1 ms |
| Pulse duration |
90~1000μs |
| Modulation Frequency |
1~999Hz, step adjustable per 1 Hz |
| Cooling System |
Built-in water cooling |
| Electrical requirement |
230VAC 50Hz 1000W |
| Dimension(W×D×H) |
430mm×350mm×1050mm |
Your message must be between 20-3,000 characters!